Skip to main content

How to Add Lyrics to MIDI Notes

By · Updated:

To add lyrics to MIDI, you put one syllable on each note. A word with two syllables, like “tonight,” takes two notes. When one syllable is sung over several notes, the extra notes get no new text, only a line that holds the word. Inside a MIDI file, each syllable is stored as a lyric event at the time its note starts.

You can type the syllables onto notes you already have, or start from a sung vocal and let a tool place the words for you. This guide covers both, then how to check the result by ear.

Lyrics on notes (example written for this guide)

An example we wrote by hand for this guide. Each column is one beat. “Tonight” is split into two syllables, “to-” and “night,” and each gets its own note. “Me” is sung over two notes, C then B: the second note carries no new syllable, only a line that holds the word. That is a melisma.

Why put lyrics on the notes

  • A singing voice can sing them. Singing synthesizers and virtual singers read the syllable on each note. Without lyrics on the notes, they have nothing to sing.
  • You can see whether the words fit. When every syllable sits on a note, a missing note or an extra syllable shows up right away.
  • Someone else can sing it. A singer or a producer reading your melody knows which word goes where, without guessing from a demo.

The rules for splitting lyrics

Every tool works a little differently, but the same three rules apply in all of them.

One syllable per note

Split each word into the syllables you would sing: “to-night,” “for-ev-er,” “beau-ti-ful.” A one-syllable word like “stay” stays whole, even if it is long. Most tools mark a split word with a hyphen at the end of each syllable except the last.

A held syllable takes several notes

When a syllable moves across two or more notes, as “me” does in the example above, type it once on the first note and leave the next notes without new text. Notation apps draw a line under them to show the word is still being sung.

Stressed syllables go on strong beats

If “to-NIGHT” lands with “to” on the beat and “night” off it, the word sounds wrong even when every syllable has a note. Move the notes, not the stress. For more on matching stress to the beat, see how to write a melody for your lyrics.

Three ways to add lyrics to MIDI

1. Type them onto notes in a notation app

If you already have the melody as MIDI, open it in a notation app and type the syllables onto the notes. In MuseScore Studio, for example:

  1. Select the first note.
  2. Press Ctrl+L (Cmd+L on a Mac) and type the first syllable.
  3. Press the hyphen key to move to the next note within the same word.
  4. Press Space to move to the next note for a new word.
  5. For a syllable held over several notes, press the hyphen key again (inside a word) or type an underscore (at the end of a word) until you reach the note for the next syllable.

Singing synthesizers work the same way: you type a syllable or word on each note in their editor.

2. Paste the lyrics onto a melody

Some tools let you paste a whole line of lyrics and spread it across the notes for you. This is faster than typing each syllable, but check where each syllable landed. Tools split words by rule, and a held syllable often ends up on the wrong note.

3. Start from a sung vocal

If the melody only exists as a recording of someone singing, you can turn the recording into notes and place the words on them in one step. This works best with a vocal-only recording, without instruments, and with the full lyrics typed out, since the tool uses the words to decide where each note starts. The result is a first draft: expect to fix some notes. Our guide to turning a vocal recording into MIDI covers what to record and how to clean up the result.

Check the result by ear

Lyrics can look right on screen and still sound wrong. Play the melody with the words sung, or sing along yourself, and listen line by line for these problems.

ProblemTry this
More syllables than notesSplit a long note into two, or cut a word from the line
More notes than syllablesHold a syllable over two notes, merge two short notes, or add a word
A word sounds wrong though every syllable has a noteIts stressed syllable is off the beat. Move the notes so the stress lands on a strong beat
The words run one note late after a held syllableThe held syllable got a new syllable on its second note. Clear that note’s text and shift the rest back

One more thing to know: many music programs ignore lyric events when they open a MIDI file. Keep a plain text copy of the lyrics with every MIDI file you send.

Keep going

If you have the words but not yet the tune, read how to write a melody for your lyrics. If your melody is a recording, start with vocal to MIDI. To put your own lyrics on your own melody and hear them sung, start a free trial of Mouta Studio on a desktop browser.

Common questions

Can a MIDI file contain lyrics?

Yes. A MIDI file can store each syllable as a lyric event at the time its note starts. Not every program shows them, so keep a text copy too.

How do I split a word across notes?

Split it into the syllables you would sing, one per note, like “to-night” or “for-ev-er.” Most tools mark each split with a hyphen.

What if one syllable is sung over several notes?

Put the syllable on the first note and leave the next notes without new text. This is called a melisma.

Can I add lyrics to MIDI from a vocal recording?

Yes. Vocal to MIDI tools turn a sung vocal into notes, and some also place the words on the notes if you give them the full lyrics. Treat the result as a first draft.

Further reading